HITBOT ELECTRIC GRIPPER SERIES – Z-ECG-20 Motlakase oa Motlakase oa menoana e meraro
Sehlopha se ka Sehloohong
Letsoho la liroboto tsa indasteri / Letsoho la liroboto tse sebelisanang / Motlakase / Motlakase o bohlale / Litharollo tsa boiketsetso
Kopo
Sebopeho
·Ho lemoha ho theoha ha clamp, mosebetsi oa tlhahiso ea sebaka
·Matla, boemo, taolo ea lebelo, taolo e nepahetseng ka Modbus
·Mohatelli oa menoana e meraro
·Selaoli se hahiloeng ka hare: mehato e nyenyane ea maoto, ho kopanya habonolo
·Mokhoa oa ho laola: 485 (Modbus RTU), I/O
Motlakase oa Motlakase oa Mehlaha e meraro Ho Bonolo ho Tlama Lintho tsa Cylinder
Tshebetso e Phahameng
Matla a ho koala: 30-80N,
Matla a Matla a Phahameng
Setorouku se Seholo
Kakaretso ea stroke: 20mm (e ka fetoloang)
Taolo e Nepahetseng
Ho laoloa ke Modbus
Molaoli o Hahiloe kahare
Sekoaelo sa sebaka se senyenyane, se bonolo ho se kopanya.
Ho Potlaka le ho Phahameng ka ho Fetisisa
Pheta-pheta: ± 0.03mm,
Stroke e le 'ngoe: 0.5s
3-Mohlahare oa Mohlahare
3-mohlahare ho clamp, e loketseng bakeng sa liketsahalo tse sa tšoaneng
Tlhaloso ea Parameter
| Mohlala No. Z-ECG-20 | Mekhahlelo |
| Kakaretso setorouku | 20mm (E ka fetoha) |
| Matla a ho tshwara | 30-80N (E ka feto-fetoha) |
| Pheta-pheta | ± 0.03 limilimithara |
| E khothalletsoang boima ba 'mele | Max. 1kg |
| Phetiso mokgoa | Rack le Pinion + Ball Guide Rail |
| Ho tlatsa oli ea likarolo tse tsamaeang | Likhoeli tse ling le tse ling tse tšeletseng kapa metsamao / nako ea limilione tse 1 |
| Nako e le 'ngoe ea ho sisinyeha ha stroke | 0.5s |
| Boemo ba mocheso o sebetsang | 5-55 ℃ |
| Mongobo o sebetsang | RH35-80（Ha ho serame） |
| Nako e khuts'oane haholo ea stroke e le 'ngoe | 0.5s |
| Ho laola setorouku | E ka fetoha |
| Tokiso ea matla a ho koeba | E ka fetoha |
| Boima ba 'mele | 1.5kg |
| Litekanyo（L*W*H） | 114 * 124.5 * 114 limilimithara |
| IP Kereiti | IP54 |
| Mofuta oa koloi | Servo Motor |
| Peak Current | 2A |
| Matla a lekantsoeng | 24V ±10% |
| Boemo ba ho ema | 0.8A |
| Mojaro o otlolohileng o lumelletsoeng ka lehlakoreng le otlolohileng | |
| Fz: | 150N |
| Torque e lumelletsoeng | |
| Mx: | 1.5 Nm |
| Ea ka: | 1.5 Nm |
| Mz: | 1.5 Nm |
Ho Nepaha ha Boemo, Sekoti sa Menoana e Meraro
Li-grippers tsa motlakase tse 3-mohlahare li na le ho pheta-pheta ha ± 0.03mm, ho amohela clamp ea mehlahare e meraro, e na le mosebetsi oa tlhahlobo ea lerotholi, tlhahiso ea karolo, e ka bang molemo ho sebetsana le mosebetsi oa ho koala oa lintho tsa cylinder.
Taolo e Hahiloe, e Phahameng ka ho Fetisisa
Leqeba le ka fetoleha ka 20mm, matla a clamping a ka fetoha 30-80N, ke ho sebelisa mekhoa ea phetisetso ea Gear rack + ball guide rail, ke controller e hahiloeng = ka hare, matla a clamping le lebelo li ka laoloa.
Boholo bo Nyenyane, Bo bonolo ho kenya
Boholo ba Z-ECG-20 ke L114 * W124.5 * H114mm, boima ke 0.65kg feela, ke sebopeho sa compact, mefuta ea ts'ehetso ea ho kenya mefuta e mengata, e bonolo ho sebetsana le mesebetsi e sa tšoaneng ea clamping.
Potlako ho React, Accuracy Force Control
Motlakase oa motlakase o na le mosebetsi oa ho thibela tlhahlobo ea lerotholi le tlhahiso ea karolo, boima ba eona ke 1.5kg, metsi a sa keneleng metsi ke IP20, tlhahiso ea boima ba "clamping" ke ≤1kg, e khona ho lemoha ho nepahala ho phahameng ho koala.
Mekhoa ea ho Atisa ea Taolo, e bonolo ho e Sebelisa
Z-ECG-20 gripper ea motlakase e ka nepahala ho laoloa ke Modbus, tlhophiso ea eona ea gripper e bonolo, ho sebelisa protocol ea Digital I / O, e hloka feela thapo e le 'ngoe ho hokela ON / OFF, e boetse e lumellana le sistimi e kholo ea taolo ea PLC.
Load Center of Gravity Offset
Khoebo ea Rōna
