Tšebelisano ea Robot Gripper - Z-EFG-C35 Motlakase oa Motlakase
Sehlopha se ka Sehloohong
Letsoho la liroboto tsa indasteri / Letsoho la liroboto tse sebelisanang / Motlakase / Motlakase o bohlale / Litharollo tsa boiketsetso
Kopo
SCIC Z-EFG letoto la liroboto grippers li boholo bo nyane ka sistimi e hahelletsoeng ka har'a servo, e etsang hore ho khonehe ho fihlela taolo e nepahetseng ea lebelo, boemo le matla a ho qoelisa.Sistimi e hahelletsoeng ea SCIC bakeng sa tharollo ea othomathike e tla u fa monyetla oa ho bula menyetla e mecha ea ho iketsetsa mesebetsi eo u neng u sa nahane hore e ka khona.
Sebopeho
· Ho lemoha ho theoha ha Gripper, ts'ebetso ea tlhahiso ea sebaka
· Matla, boemo le lebelo li ka laoloa ka nepo ka Modbus
·Bophelo bo bolelele: lipotoloho tse limilione tse mashome, tse fetang manala a moea
·Selaoli se hahiloeng ka hare: sebaka se senyenyane sa maoto, ho kopanya habonolo
·Mokhoa oa ho laola: 485 (Modbus RTU), I/O
Stroke ke 35mm, Clamping Force ke 50N.E lumellana le 6-Axis Robot Arm.
Maqhubu a Phahameng
Nako e khuts'oane ea stroke ke 0.5s
Bonepe bo Phahameng
Pheta-pheta ke ± 0.03mm
Phaello e phahameng
Keletso ea ho koala boima ba 'mele ≤1kg
Hokela le ho Bapala
Motlakase oa ho tšoara ka ho khetheha bakeng sa roboto ea 6-axis
Mohatla oa Fetola
Mohatla oa eona oa fetoha ho latela litlhoko tse fapaneng
Clamping e Bonolo
E ka tiisa lintho tse robehang le tse holofetseng
● Ho khothalletsa phetoho ea ho fetola li-grippers tsa pneumatic ka li-grippers tsa motlakase, mochine oa pele oa motlakase o nang le tsamaiso e kopanetsoeng ea servo Chaena.
● Phetoho e phethahetseng bakeng sa compressor ea moea + filthara + solenoid valve + throttle valve + pneumatic gripper
● Bophelo ba litšebeletso tsa lipotoloho tse ngata, bo tsamaellanang le silindara e tloaelehileng ea Majapane
Tlhaloso ea Parameter
| Mohlala No. Z-EFG-C35 | Mekhahlelo |
| Kakaretso ea stroke | 35mm e ka fetolehang |
| Matla a ho tshwara | 15-50N e ka fetolehang |
| Pheta-pheta | ± 0.03 limilimithara |
| E khothalletsoang boima ba 'mele | ≤1kg |
| Mokhoa oa phetiso | Gear rack + Tataiso e chitja |
| Ho tlatsa oli ea likarolo tse tsamaeang | Likhoeli tse ling le tse ling tse tšeletseng kapa ho sisinyeha / nako ea limilione tse 1 |
| Nako e le 'ngoe ea ho sisinyeha ha stroke | 0.5s |
| Mokhoa oa ho sisinyeha | Menoana e 'meli e tsamaea e tšekaletse |
| Boima ba 'mele | 0.5kg |
| Litekanyo (L*W*H) | 63*63*95mm |
| Matla a sebetsang | 24V±10% |
| E lekantsoe hajoale | 0.3A |
| Peak current | 1A |
| Matla | 8W |
| Sehlopha sa tšireletso | IP20 |
| Mofuta oa koloi | DC e se nang brush |
| Boemo ba mocheso o sebetsang | 5-55 ℃ |
| Mongobo o sebetsang | RH35-80 (Ha ho serame) |
| Mojaro o otlolohileng o lumelletsoeng ka lehlakoreng le otlolohileng | |
| Fz: | 150N |
| Torque e lumelletsoeng | |
| Mx: | 2.5 Nm |
| Ea ka: | 2 Nm |
| Mz: | 3 Nm |
Ho Khanna le Molaoli o Kopantsoeng ka Hare
Z-EFG-C35 gripper ea motlakase e kenyelelitse tsamaiso ea servo ka hare, sekhahla sa eona se feletseng ke 35mm, matla a ho koala ke 15-50N, matla a eona a ho otla le ho otla a ka fetoha, 'me ho pheta-pheta ha eona ke ± 0.03mm.
E lumellana le Six-Axis Robot Arm
Sehlahisoa se lumellana le letsoho la roboto ea 6-axis, ho lemoha plug le ho bapala, nako e khutšoanyane ea stroke ke 0.5s feela, ho finyella tlhokahalo e potlakileng le e tsitsitseng ea clamping bakeng sa mohala oa tlhahiso.
Boholo bo Nyenyane, Bo bonolo ho kenya
Boholo ba sehlahisoa sa Z-EFG-C35 ke L63*W63*H95mm feela, bo nyane, mme bo khona ho kenya tikolohong e moqotetsane.
Karabelo e potlakileng, Ho nepahala bakeng sa Taolo ea Matla
Mofuta oa eona oa ho sisinyeha ke 2-finger-parallel, IP20 e sa keneleng metsi, karolo ea terminal clamping ea eona e ka fetoha neng kapa neng, bareki ba ka fetola clamper ho latela tlhoko ea tlhahiso.
Mekhoa ea ho Atisa ea Taolo, e bonolo ho e Sebelisa
Tlhophiso ea Z-EFG-C35 e bonolo, mekhoa e mengata ea ho laola, ho kenyelletsa le 485 (Modbus RTU), Pulse, I / O, 'me e lumellana le tsamaiso ea mantlha ea PLC.
Load Center of Gravity Offset
Khoebo ea Rōna
