Indasteri Manipulator 2 Axis Servo Motor Arm Robot Ente ea Molding Mechanical Arm
Indasteri Manipulator 2 Axis Servo Motor Arm Robot Ente ea Molding Mechanical Arm
Sesebelisoa le Sebaka sa Leseli
1. Kopo ea PC, e kopantsoeng le lenaneo la Blockly ho ntlafatsa haholoanyane phihlelo ea ts'ebetso.Ho tobana le 'maraka oa thuto, ho thabisa le ho ruta.Ho bonolo ho sebetsa le ho potlakela ho qala.
2. E nyenyane ka boholo le tlhōlisano ea theko.Ho feta moo, fokotsa theko ka 1/3.
3. Letsoho la roboto le sebetsang ka bongata ho kopana le boqapi bo se nang moeli.Ho ngola, ho penta, khatiso ea 3D, ho betla ......
4. E na le melemo eohle ea letoto la Z-Arm.Tšebelisano e sireletsehileng, ho boloka sebaka, ho tsamaisoa habonolo, ts'ebeliso e bonolo.
Pontšo ea Kopo
Motlakase oa Motlakase
Khatiso ea 3D
Mohope oa Suction
Ho taka
Moqapi oa Laser
Lihlahisoa tse Amanang
Tlhaloso ea Parameter
Z-Arm 1522 ke letsoho la robotiki le kopaneng la 4-axis le nang le drive/control e hahelletsoeng ka hare.Terminal ea Z-Arm 1522 e ka fetoloa, e leng bonolo ho e nkela sebaka le ho fihlela litlhoko tsa likhoebo tse fapaneng.Ka ho fetola lisebelisoa tse fapaneng tsa terminal, e ka ba mothusi oa hau ho sebelisana le uena.E ka sebelisoa mochineng oa khatiso oa 3D, lisebelisoa tsa ho tšoara, tin welder, laser engraving mochine, ho hlopha roboto, joalo-joalo E ka hlokomela seo u ka se nahanang, ho eketsa katleho le ho feto-fetoha ha mosebetsi.
Z-Arm 1522 Letsoho la Robot le Tšebelisano | Mekhahlelo |
1 Bolelele ba Arm ea Axis | 100mm |
1 Axis Rotation Angle | ±90° |
2 Bolelele ba Arm ea Axis | 120 limilimithara |
2 Axis Rotation Angle | ±150° |
Z Axis Stroke | 150 limilimithara |
R Axis Rotation Range | ±180° |
Lebelo la Linear | 500mm/s |
Pheta-pheta | ± 0.1mm |
Tefo e Tloaelehileng | 0.3kg |
Boholo ba Moputso | 0.5kg |
Degree ea Tokoloho | 3 |
Phepelo ea motlakase | 220V/110V50-60HZ ikamahanya le 24V |
Puisano | Boema-kepe ba serial |
Scalability | E fumaneha |
I/O Port Digital Input (Ka thoko) | ≤14 |
I/O Port Digital Output (E Isolated) | ≤22 |
I/O Port Analog Input (4-20mA) | ≤6 |
I/O Port Analog Output (4-20mA) | 0 |
Bophahamo ba Mochini | 400mm |
Boima ba Mochini | 4.8kg |
Litekanyo tsa Kantle tsa Motheo | 160mm * 160mm * 45mm |
Ho fumanwa ha Ho thulana | √
|
Hula Thuto | √ |
Lisebelisoa tsa Terminal
Hlooho ea Khatiso ea 3D | Boholo ba boholo ba khatiso (L*W*H) | 150mm * 150mm * 150mm (MAX) |
Lisebelisoa tsa khatiso tsa 3D | Φ1.75 limilimithara PLA | |
Nepahalo | 0.1 limilimithara | |
Laser | Tšebeliso ea motlakase | 500mw |
Wavelength | 405nm (Blue Laser) | |
Phepelo ea motlakase | 12V, TTL trigger (Ka PWM Driver) | |
Pene Holder | Bophara ba borashe | 10 limilimithara |
Mohope oa Suction | Diameter ea mohope oa ho monya | 20 limilimithara |
Pompo ea Moea | Phepelo ea motlakase | 12V, TTL trigger |
Khatello | ±35Kpa | |
Pneumatic Gripper | Boholo ba ho bula | 27.5 limilimithara |
Mofuta oa koloi | Moea oa moea | |
Matla a ho kokobetsa | 3.8N |